Dell POWEREDGE M1000E - Manual (Page 72)

44 Fabric OS Command Reference
53-1002746-01
agAutoMapBalance
2
agAutoMapBalance
Controls automatic remapping of F_Ports in AG mode.
SYNOPSIS agautomapbalance --enable [-fport | -nport]
[-pg Port_Group_Number | -all]
agautomapbalance --disable [-fport | -nport]
[-pg Port_Group_Number | -all]
agautomapbalance --force
agautomapbalance --show
agautomapbalance --help
DESCRIPTION Use this command to control the automatic rebalancing of F_Ports for login distribution in the event that
an F_Port goes offline or an N_Port comes online.
If automatic rebalancing is enabled, and an F_Port goes offline, the remaining F_Port logins are
redistributed across the existing N_Ports. Similarly if a new N_Port comes online, some of the F_Port
logins being routed through existing N_Ports would be failed over to the new N_Ports. Both operations
are potentially disruptive. Disabling automatic rebalancing of login distribution provides a way of avoiding
disruptions associated with routine F_Port/N_Port offline/online events.
The default values for agautomapbalance are as follows:
•
Disable automatic login redistribution when F_Ports go offline.
•
Enable automatic login redistribution when N_Ports come online.
Use the --show option to display the current configuration of the automatic rebalancing feature. The
command output varies depending on current AG policy settings:
•
If Port Group Policy is enabled on the switch, the command displays the following information for
each configured port group:
-
PG_ID - Port Group number
-
LB mode - Login Balancing mode: enabled or disabled
-
nport - Enabled or disabled
-
fport- Enabled or disabled
•
If Auto Policy is enabled on the switch, the command displays the status of the automatic
rebalancing feature per port type as either disabled or enabled.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
--enable
Enables automatic login redistribution upon removal or addition of a specified port
type.
-fport
Enables automatic login redistribution in the event that one or more F_Ports go
offline. When automatic login redistribution is enabled, the remaining F_Ports are
remapped such that logins are balanced among the existing Imports.