Dell POWEREDGE M1000E - Manual (Page 633)

Fabric OS Command Reference 605
53-1002746-01
perfMonitorShow
2
interval
The interval value must be greater than or equal to 5, and it must be a multiple of
5. In the case of end-to-end monitor, Tx and Rx counts are displayed in the unit of
byte when this operand is specified. This operand is optional; if the operand is not
specified, this command displays cumulative counts.
EXAMPLES To display EE monitors on port 8:
switch:admin> perfmonitorshow --class EE 2/8
There are 8 end-to-end monitor(s) defined on port 8.
KEY SID DID OWNER_APP TX_COUNT RX_COUNT OWNER_IP_ADDR
---------------------------------------------------------------------
1 0xfffff2 0x000002 TELNET 0x0000000000000000 0x0000000000000000 N/A
2 0xfffff3 0x000003 TELNET 0x0000000000000000 0x0000000000000000 N/A
3 0xfffff4 0x000004 TELNET 0x0000000000000000 0x0000000000000000 N/A
4 0xfffff5 0x000005 TELNET 0x0000000000000000 0x0000000000000000 N/A
5 0xfffff6 0x000006 TELNET 0x0000000000000000 0x0000000000000000 N/A
6 0xfffff7 0x000007 TELNET 0x0000000000000000 0x0000000000000000 N/A
7 0xfffff8 0x000008 TELNET 0x0000000000000000 0x0000000000000000 N/A
0 0x000000 0x1182ef TELNET 0x0000000000000000 0x0000000000000000 N/A
To display end-to-end monitors on a port at an interval of every 5 seconds:
switch:admin> perfmonitorshow --class EE 8 5
Showing EE monitors 8, 5: Tx/Rx are # of bytes
0 1 2 3 4 5 6 7
----- ----- ----- ----- ----- ----- ----- -----
Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx
===== ===== ===== ===== ===== ===== ===== =====
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
To display ISL monitor information on a port:
switch:admin> perfmonitorshow --class ISL 1/1
Total transmit count for this ISL: 1462326
Number of destination domains monitored: 3
Number of ports in this ISL: 2
Domain 97: 110379 Domain 98: 13965
Domain 99: 1337982
SEE ALSO perfMonitorClear , perfAddEEMonitor