Switchviolation – Dell POWEREDGE M1000E User Manual

Page 1060

1032

Fabric OS Command Reference

53-1002746-01

switchViolation

Dumps the DCC violations for a switch.

SYNOPSIS

switchViolation --dump -dcc

DESCRIPTION

Use this command to display all Device Connection Control (DCC) violations that have occurred on a
switch. Internally the command searches "errdumpall" for the DCC violations. For each DCC violation,
the command displays the device WWN and the port where the violation occurred.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

This command can be executed on both active and standby CPs. This command does not support High
Availability (HA).

OPERANDS

This command has the following operands. If executed without operands, the command prints the usage.

--dump

Displays specified policy violation.

-dcc

Specifies the violation type as DCC.

EXAMPLES

To display DCC violations for a switch:

switch:admin> switchviolation --dump -dcc
Device WWN Port
-----------------------------------
22:00:00:04:cf:75:59:87 10