Portlogpdisc – Dell POWEREDGE M1000E User Manual

Page 790

Text mode
Original mode

762

Fabric OS Command Reference

53-1002746-01

portLogPdisc

Sets or clears the debug_pdisc_flag.

SYNOPSIS

portlogpdisc 0 | 1

DESCRIPTION

Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental
monitor. A setting of 1 enables logging of Port Discovery parameters. The PDISC log is disabled by
default.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operand:

0 |1

Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0.

EXAMPLES

To set the debug_pdisc_flag:

switch:admin> portlogpdisc 1
PDISC log setting = 1