Dell POWEREDGE M1000E - Manual (Page 1018)

990 Fabric OS Command Reference
53-1002746-01
supportSave
2
EXAMPLES To save RASLOG, TRACE, supportShow, and other support information to an FTP server in interactive
mode:
switch:admin> supportsave
This command collects RASLOG, TRACE, supportShow, \
core file, FFDC data
and then transfer them to a FTP/SCP/SFTP server \
or a USB device.
This operation can take several minutes.
NOTE: supportSave will transfer existing trace dump \
file first, then
automatically generate and transfer latest one. \
There will be two trace dump
files transferred after this command.
OK to proceed? (yes, y, no, n): [no] y
Host IP or Host Name: 192.168.126.115
User Name: admin
Password:*******
Network Protocol(1-auto-select, 2-FTP, 3-SCP, 4-SFTP) [1]: 4
Remote Directory: /temp/support
Saving support information for chassis:HL51,module:RAS...
Saving support information for chassis:HL51,module:TRACE_OLD...
Saving support information for chassis:HL51,module:TRACE_NEW...
Saving support information for chassis:HL51,module:FABRIC...
Saving support information for chassis:HL51,module:CORE_FFDC...
Saving support information for chassis:HL51,module:DIAG...
Saving support information for chassis:HL51,module:RTE...
Saving support information for chassis:HL51,module:ISCSID_DBG...
Saving support information for chassis:HL51,module:AGDUMP...
Saving support information for chassis:HL51,module:SSHOW_PLOG...
Saving support information for chassis:HL51,module:SSHOW_OS...
Saving support information for chassis:HL51,module:SSHOW_EX...
Saving support information for chassis:HL51,module:SSHOW_FABRIC...
(output truncated)
To collect support information on a Brocade 5100 and save it to an attached USB device (timeout values
are doubled):
switch:admin> supportsave -U -d mysupportsave -t 2
This command collects RASLOG, TRACE, supportShow, \
core file, FFDC data
and then transfer them to a FTP/SCP/SFTP server \
or a USB device.
This operation can take several minutes.
NOTE: supportSave will transfer existing trace dump \
file first, then
automatically generate and transfer latest one. \
There will be two trace dump
files transferred after this command.
OK to proceed? (yes, y, no, n): [no] y
Saving support information for chassis:ras9,module:RAS...
Saving support information for chassis:ras9,module:TRACE_OLD...
Saving support information for chassis:ras9,module:TRACE_NEW...
Saving support information for chassis:ras9,module:FABRIC...
Saving support information for chassis:ras9,module:CORE_FFDC...
No core or FFDC data files found!
Saving support information for chassis:ras9,module:DIAG..