Fandisable – Dell POWEREDGE M1000E User Manual

Page 309

Text mode
Original mode

Fabric OS Command Reference

281

53-1002746-01

fanDisable

Disables a fan unit.

SYNOPSIS

fandisable unit

DESCRIPTION

Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.

NOTES

This command is not available on nonbladed systems except for the Brocade 5300.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operand:

unit

Specifies the number of the fan unit to disable.

EXAMPLES

To disable a fan unit:

switch:admin> fandisable 1

Fan unit 1 has been disabled