Dell POWEREDGE M1000E - Manual (Page 223)

Fabric OS Command Reference 195
53-1002746-01
cryptoCfg
2
The command group includes a show option, --show -hacluster. When invoked on a member node, this
command displays the committed HA cluster configuration. When invoked on the group leader, both
defined and committed configuration data is displayed including the following parameters:
•
Encryption group name: A user-defined name
•
Number of HA clusters in the existing encryption group: numeric value
•
For each HA cluster:
-
HA cluster name: user-defined label
-
Number of encryption engine entries: numeric value
-
HA cluster Status: Committed or Defined
•
For each encryption engine member in the HA cluster:
-
EE WWN: the encryption group world wide name
-
EE slot number: the encryption group slot number
-
EE status: online or offline
OPERANDS The cryptoCfg HA cluster configuration function has the following operands:
--help -hacluster
Displays the synopsis for the HA cluster configuration function. This command is
valid on all nodes.
--create -hacluster
Defines an HA cluster with a specified name and optionally associates up to two
encryption engines with the HA cluster. This command is valid only on the group
leader. The EEs must be members of the same encryption group as the group
leader on which this command is issued. This command fails if the member
nodes' IP addresses for the GbE ports (I/O sync ports) are not configured. The
encryption engines must belong to different switches or chassis. This rule is
enforced by the CLI to ensure redundancy.
The following operands are supported:
HA_cluster_name
Specifies the name for the HA cluster. The name can be up to 31 characters long
and can include alphanumeric characters, hyphens, and underscores. White
space and other special characters are not permitted. This operand is required.
node_WWN
Specifies the WWN of the switch or chassis to which the encryption engine
belongs. This operand is optional; if omitted, only the HA cluster name is defined.
You may add EEs separately with the --add -haclustermember command.
slot
Specifies the encryption engine slot number on bladed systems.
--delete -hacluster
Deletes the HA cluster with the specified name. This command is valid only on the
group leader. The following operand is required:
HA_cluster_name
Specifies the name of the HA cluster to be deleted.
--add -haclustermember
Adds one or more encryption engine members to an already configured HA. A
maximum of two HA cluster members is currently supported. The EEs must be
part of the same encryption group as the node on which this command is issued.
This command is valid only on the group leader. The encryption engines must
belong to different switches or chassis. This rule is enforced by the CLI to ensure
redundancy.