Dell POWEREDGE M1000E - Manual (Page 69)

Fabric OS Command Reference 41
53-1002746-01
ag
2
To enable persistent ALPA in stringent mode:
switch:admin> ag --persistentalpaenable 1 -s
Persistent ALPA mode is enabled
To disable persistent ALPA mode:
switch:admin> ag --persistentalpaenable 0
Persistent ALPA mode is enabled
To display the ALPA database entries for F_Port 5:
switch:admin> ag --printalpamap 5
Hash table for Port 5 data
PWWN ALPA
============================================
20:12:00:05:1e:85:92:88 1
20:07:00:05:1e:01:0b:4a 3
To attempt to remove a device entry from the database while the device is online and cannot be
removed:
switch:admin> ag --deletepwwnfromdb \
0:12:00:05:1e:85:92:88 20:08:00:05:1e:01:0b:4a Online. \
Cannot delete an online device
To remove a device entry from the database when the device is offline:
switch:admin> ag --deletepwwnfromdb \
0:12:00:05:1e:85:92:88
Device 20:13:00:05:1e:85:92:88 successfully deleted
To remove a device entry from the database when the device is not present in the table
switch:admin> ag --deletepwwnfromdb \
0:12:00:05:1e:85:92:00 20:12:00:05:1e:85:92:00 not found.
Please check the device name
To remove the PWWN to ALPA value for port 5 from the database and to verify the removal:
switch:admin> ag --clearalpamap 5
ALPA Table for port 5 is cleared
switch:admin> ag --clearalpamap 5
Hash table for Port 5 data
PWWN ALPA
============================================
Hash Table is empty
Device WWN mapping commands
To create a WWN to N_Port mapping for two devices.
switch:admin> ag --addwwnmapping 8 \
"0:12:00:05:1e:85:92:88; 0:12:00:05:1e:85:92:88"
To delete one of the device WWN to N_Port mappings.
switch:admin> ag --delwwnmapping 8 \
"0:12:00:05:1e:85:92:88"