Dell POWEREDGE M1000E - Manual (Page 245)

Fabric OS Command Reference 217
53-1002746-01
cryptoCfg
2
--EE node_WWN slot
Specifies the node WWN of any encryption engine in the encryption group. This
command frees up all WWNs associated with the specified encryption engines for
reallocation. You must specify a slot number in addition to the EE node WWN. To
complete the reclaiming of an EE, you must remove the EE from the chassis after
the reclaim operation and commit the transaction.
-list
Displays a listing of crypto-target containers affected by the reclaim operation.
This operand is optional.
-cleanup
Removes all crypto configurations present on the member node after the WWNs
have been reclaimed. This command must be executed on the ejected member
node.
EXAMPLES 1. Create a zone that includes initiator and target.
a. Determine the device configuration.
FabricAdmin:switch> nsshow
{
Type Pid COS PortName NodeName TTL(sec)
N 010600;2,3;10:00:00:00:c9:2b:c9:3a;20:00:00:00:c9:2b:c9:3a;na
NodeSymb: [35] "Emulex LP9002 FV3.82A1 DV5-4.81A4 "
Fabric Port Name: 20:06:00:05:1e:41:9a:7e
Permanent Port Name: 10:00:00:00:c9:2b:c9:3a
Port Index: 6
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
The Local Name Server has 1 entry }
FabricAdmin:switch> nscamshow
nscamshow for remote switches:
Switch entry for 2
state rev owner
known v611 0xfffc01
Device list: count 13
Type Pid COS PortName NodeName
NL 0208d3;3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d;
FC4s: FCP
PortSymb:[55]"LSI7404XP-LC BR A.1 03-01081-02D
FW:01.03.06 Port 1"
Fabric Port Name: 20:08:00:05:1e:34:e0:6b
Permanent Port Name: 20:0c:00:06:2b:0f:72:6d
Port Index: 8
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
b. Create and enable a zone named "itzone" that includes initiator and target.
FabricAdmin:switch> zonecreate itzone, \
"10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d"
FabricAdmin:switch> cfgcreate itcfg, itzone
FabricAdmin:switch> cfgenable itcfg