Myid – Dell POWEREDGE M1000E User Manual

Page 576

548

Fabric OS Command Reference

53-1002746-01

myId

Displays the current login session details.

SYNOPSIS

myid

DESCRIPTION

Use this command to display the status of the system and the login session details. This includes IPv4 or
IPv6 addresses associated with the login session.

The login session gives details of the following:

•

CP/switch (or console/serial port) used to log in.

•

The IP address of the current login session for Telnet or the name of the current console port or the
serial port (if modem login used).

•

The current CP mode (Active, Standby, or Unknown).

•

The current system status (Redundant, Nonredundant, or Unknown).

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

None

EXAMPLES

To display current login information:

switch:admin> myid
Current Switch: switch
Session Detail: switch (123.123.123.123) Active Redundant