Fwalarmsfilterset – Dell POWEREDGE M1000E User Manual

Page 438

410

Fabric OS Command Reference

53-1002746-01

fwAlarmsFilterSet

Enables or disables alarms for Fabric Watch.

SYNOPSIS

fwalarmsfilterset [mode]

DESCRIPTION

Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all
nonenvironment class alarms are suppressed. By turning on the alarms, all class alarms are generated.

NOTES

This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operand:

mode

Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is specified,
the default value is 0 (alarms deactivated). This operand is optional; if omitted, this
command disables the alarms.

EXAMPLES

To enable alarms in Fabric Watch:

switch:admin> fwalarmsfilterset
FW: Alarms are already disabled

switch:admin> fwalarmsfilterset 1
FW: Alarms are already enabled