Dell POWEREDGE M1000E - Manual (Page 832)

804 Fabric OS Command Reference
53-1002746-01
portShow
2
-dump
Displays a raw data dump including data for all information types.
param
Limits output to one or more of the following parameters, given the
commands and levels specified with this command. This operand is optional;
if omitted, output for all parameters is displayed. There is no default
parameter.
-sid SID
Displays output for the specified SID only.
-did DID
Displays output for the specified DID only.
-lun LUN
Displays output for the specified LUN only.
-timer
Displays timer information only.
options
Affects all levels and commands globally. Only one option is supported.
-zero
Displays zero-valued statistics. Note that some commands may show
zero-valued information regardless of whether or not this option is specified.
-ficon
Displays sub-menu for FICON emulation display commands when issued with a
VE_Port number. The syntax for -ficon is as follows:
portshow xtun [slot/]ve_port -ficon [command] [options]
The following optional commands are supported with -ficon; if omitted, the usage
for all parameters is displayed. The xtun -ficon command options include
displays for all types of FICON Emulation.
-help
Displays the command usage. You must specify a VE_Port number to display
the help functions, for example, portshow xtun 7/12 -ficon -help.
-stats
Displays global FICON Emulation statistics for the tunnel including FICON
XRC Emulation, FICON Tape Write, FICON Tape Read, FICON Teradata
Write, and FICON Teradata Read statistics.
-fdpb adrs
Displays FICON ports or a specific FICON Device Path Block.
-fchb adrs
Displays FICON logical partitions (LPARs) or a specific FICON Channel
Control Block.
-fcub adrs
Displays FICON images (the same output as with -images) or a specific
FICON Control Unit Block.
-images
Displays FICON images.
-fdcb adrs
Displays FICON devices or specific FICON Device Control Block.
-tapeperf
Starts the emulated Tape Read and Write performance monitor or displays
the performance statistics.