Mstddisable – Dell POWEREDGE M1000E User Manual
Page 573
Fabric OS Command Reference
545
53-1002746-01
msTdDisable
2
msTdDisable
Disables the Management Server (MS) topology discovery service.
SYNOPSIS
mstddisable ["ALL"]
DESCRIPTION
Use this command to disable the management server topology discovery service on a local switch or an
entire fabric. This change takes effect immediately and commits to the configuration database for all
affected switches. The change is persistent across power cycles and reboots.
NOTES
Topology Discovery Management requires the attached devices (including attached switches) to support
request node identification data (RNID) extended link service (ELS).
When an FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued
only from the primary FCS.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is supported only in AD0 and AD255 contexts.
OPERANDS
The following operand is optional:
"ALL"
Disables the MS topology discovery service throughout the entire fabric. This
operand must be enclosed in double quotation marks.
EXAMPLES
To disable the MS topology discovery service on the local switch only:
switch:admin> mstddisable
This may erase all NID entries. Are you sure?
(yes, y, no, n): [no] y
Request to disable MS Topology Discovery Service
in progress....
done.
*MS Topology Discovery disabled locally.
To disable MS topology discovery on all the switches in the fabric:
primaryfcs:admin> mstddisable "ALL"
This may erase all NID entries. Are you sure?
(yes, y, no, n): [no] y
Request to disable MS Topology Discovery Service
in progress....
done.
*MS Topology Discovery disabled locally.
*MS Topology Discovery Disable Operation Complete!!
SEE ALSO