Dell POWEREDGE M1000E - Manual (Page 894)

866 Fabric OS Command Reference
53-1002746-01
portThConfig
2
-area area[,area]... | all
Specifies the area. You can either specify one or more areas separated by a
comma, or you can specify all to indicate all areas.
-port port_list | all
Specifies one or more ports or all ports. The port_list operand supports one of the
following values:
•
A single port number preceded by the slot number on bladed systems.
•
A set of comma-separated port numbers, preceded by the slot number on
bladed systems, for example, 3,8,15, or 1/1,1/9,2/27.
•
A port range, for example 3-24 or 1/1-1/9. A port range cannot span slots.
--help
Displays the command usage.
EXAMPLES To set custom thresholds for the port class and CRC area with E-mail alerts:
switch:admin> portthconfig --set port -area crc \
-highthreshold -value 2 \
-trigger above -action email
switch:admin> portthconfig --set port -area crc \
-highthreshold -value 2 \
-trigger below -action email
switch:admin> portthconfig --set port -area crc \
-lowthreshold -value 1 \
-trigger above -action email
switch:admin> portthconfig --set port -area crc \
-lowthreshold -value 1 \
-trigger below -action email
To apply the new custom settings so they become effective:
switch:admin> portthconfig --apply port -area crc \
-action cust -thresh_level cust
To set custom thresholds for the VE_Port class and UTIL area with SNMP alerts and save the thresholds
nonpersistently:
switch:admin> portthconfig --set ve-port -area util \
-highthreshold -value 2 \
-trigger above -action snmp -nosave
switch:admin> portthconfig --set ve-port -area util \
-highthreshold -value 2 \
-trigger below -action snmp -nosave
switch:admin> portthconfig --set ve-port -area util \
-lowthreshold -value 1 \
-trigger above -action snmp -nosave
switch:admin> portthconfig --set ve-port -area util \
-lowthreshold -value 1 \
-trigger below -action snmp -nosave