Dell POWEREDGE M1000E - Manual (Page 1072)

1044 Fabric OS Command Reference
53-1002746-01
sysShutDown
2
sysShutDown
Provides a graceful shutdown to protect the switch file systems.
SYNOPSIS sysshutdown
DESCRIPTION On standalone platforms, use this command to shut down the switch operating system.
On enterprise-class platforms, when sysShutDown is called on the active control processor (CP), the
command shuts down the active CP, standby CP, and any AP blades.
Some platforms will only shut down the operating systems; others will shut down the operating system as
well as shut off the power, that is, the LEDs will turn black.
After executing this command, manually power off the system. To reboot the system, manually turn the
power switch on.
NOTES This command is not supported on the standby CP.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To perform a system shutdown on a standalone platform:
switch:admin> sysshutdown
This command will shutdown the operating systems on your
switch. You are required to power-cycle the switch in
order to restore operation.
Are you sure you want to shutdown the switch [y/n]? y
Broadcast message from root (ttyS0) Mon Sep 12 17: \
52:12 2005...
The system is going down for system halt NOW !!
INIT: Switching to runlevel:
INIT: Sending processes the TERM signal
ess095:root> Unmounting all filesystems.
The system is halted
flushing ide devices: hda
Power down.
To perform a system shutdown on a Brocade DCX-4S:
switch:admin> sysshutdown
This command will shutdown the operating systems on your
switch. You are required to power-cycle the switch in
order to restore operation.
Are you sure you want to shutdown the switch [y/n]?y
HA is disabled
Shutting down blade in slot:1, IP addr:127.1.14.2
Shutting down blade in slot:8, IP addr:127.1.14.9
Shutting down OCP at:0.0.0.0
Broadcast message from root (pts/0) Wed Nov 5 19:03:06 2008...
The system is going down for system halt NOW !!