Setverbose – Dell POWEREDGE M1000E User Manual

Page 970

942

Fabric OS Command Reference

53-1002746-01

setVerbose

Specifies module verbose level.

SYNOPSIS

setverbose [module_name][level]

DESCRIPTION

Use this command to set the verbose level of the specified module. These levels filter the display of the
debug message to the serial console. By default, no debug messages are displayed.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operands:

module_name

Specify the name of the module for which the verbose level is to be set; module
names are case-sensitive.

level

Specify the verbose level (0 to 9).

EXAMPLES

To set the verbose level of a module named NS to value 3:

switch:admin> setverbose NS 3
switch:admin> dbgshow NS
Module NS, debug level = 0, verbose level = 3