Fwset – Dell POWEREDGE M1000E User Manual
Page 452
424
Fabric OS Command Reference
53-1002746-01
fwSet
2
fwSet
Sets port persistence time.
SYNOPSIS
fwset --port --persistence seconds
DESCRIPTION
Use this command to set port persistence time, a parameters controlled by Fabric Watch. Port
persistence time specifies the time in seconds during which a port must persistently be in a marginal
state before being labeled as such. port persistence is a switch-wide parameter. Use portThconfig to
display port persistence time.
NOTES
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
--port --persistence seconds
Specifies the time, in seconds, during which a port must be persistently in a
marginal state before being recognized as such.
EXAMPLES
To set the port persistence time to 18 seconds:
switch:user> fwset --port --persistence 18
SEE ALSO