Cfgdisable – Dell POWEREDGE M1000E User Manual

Page 135

Fabric OS Command Reference

107

53-1002746-01

cfgDisable

Disables a zone configuration.

SYNOPSIS

cfgdisable

DESCRIPTION

Use this command to disable the current zone configuration. The fabric returns to non-zoning mode, a
mode in which all devices can see each other.

This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile
memory. If a transaction is open on a different switch in the fabric when this command is run, the
transaction on the other switch is automatically aborted. A message displays on the other switches to
indicate that the transaction was aborted.

If the default zone access mode is "No Access", then this command becomes equivalent to cfgEnable
"d_efault_Cfg". Refer to defZone help for information on zone access configuration.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

OPERANDS

None

EXAMPLES

To disable the current zone configuration:

switch:admin> cfgdisable
You are about to disable zoning configuration. This
action will disable any previous zoning configuration.
Do you want to disable zoning configuration? \
(yes, y, no, n): [no] y