Dell POWEREDGE M1000E - Manual (Page 88)

60 Fabric OS Command Reference
53-1002746-01
auditCfg
2
EXAMPLES To configure the audit log filter:
switch:admin> auditcfg --class 2,3,8
Audit filter is configured.
To enable audit logging:
switch:admin> auditcfg --enable
Audit filter is enabled.
To display the configuration:
switch:admin> auditcfg --show
Audit filter is enabled.
2-SECURITY
3-CONFIGURATION
8-CLI
Severity level: INFO
To disable audit logging and to display the configuration (the filters are unchanged but show the disabled
state):
switch:admin> auditcfg --disable
Audit filter is disabled.
switch:admin> auditcfg --show
Audit filter is disabled.
2-SECURITY
3-CONFIGURATION
8-CLI
Severity level: INFO
SEE ALSO auditDump , rasAdmin