Dell POWEREDGE M1000E - Manual (Page 1139)

Fabric OS Command Reference 1111
53-1002746-01
zoneDelete
2
zoneDelete
Deletes a zone.
SYNOPSIS zonedelete "zonename"
DESCRIPTION Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory using the cfgSave command. For the change to
become effective, enable the configuration with the cfgEnable command.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS The following operand is required:
"zonename"
Specify the name of the zone to be deleted. Quotation marks are optional.
EXAMPLES To delete the zone "Blue_zone":
switch:admin> zonedelete "Blue_zone"
SEE ALSO zoneAdd , zoneCreate , zoneRemove , zoneShow