Dell POWEREDGE M1000E - Manual (Page 561)

Fabric OS Command Reference 533
53-1002746-01
lsDbShow
2
lsAge
Age, in seconds, of this LSR. An LSR is removed from the database when its age
exceeds 3,600 seconds.
reserved
Reserved for future use.
type
Type of the LSR. Always 1.
options
Always 0.
lsId
ID of this LSR. It is identical to the domain ID.
advertiser
Domain ID of the switch that originated this LSR.
incarn
Incarnation number of this LSR.
length
Total length, in bytes, of this LSR. Includes header and link state information for all
links.
chksum
Checksum of total LSR, with exception of lsAge field.
linkCnt
Number of links in this LSR. Each link represents a neighbor in NB_ST_FULL
state.
flags
Always 0.
LinkId
ID of this link. It is the domain ID of the switch on the other side of the link.
out port
Port number on the local switch.
rem port
Port number of the port on the other side of the link.
cost
Cost of this link. The default cost for a 1 Gbps link is 1,000.
costCnt
Always 0.
type
Always 1.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operand:
domain
Specifies the domain ID of the LSR to be displayed. This operand is optional; if
omitted, the entire link state database is displayed.