Dell POWEREDGE M1000E User Manual
Page 172
144
Fabric OS Command Reference
53-1002746-01
configDownload
2
DIAGNOSTICS
The configuration download may fail for one or more of the following reasons:
•
The switch has not been disabled. Disabling the switch is not necessary for configuration files
containing only certain SNMP or Fabric Watch parameters. You can run configDownload first
without disabling the switch, and if there is at least one changed parameter outside of Fabric Watch
or SNMP, you are prompted to disable the switch before proceeding.
•
The host name is not known to the switch.
•
The host IP address cannot be contacted.
•
You do not have permission on the host.
•
You are running a script that prints something at login.
•
The file does not exist on the host.
•
The file is not a switch configuration file.
•
The FTP server is not running on the host.
•
The configuration file contains errors.
•
The configuration file's logical switch definitions do not match the definitions on the target switch.
•
Admin Domains are configured on the switch, and you attempt to download a Virtual Fabrics
configuration file.
EXAMPLES
To download the switch configuration file interactively to the current logical switch from a local directory
(no chassis permissions):
switch:admin> configdownload
Protocol (scp, ftp, sftp, local) [ftp]:
Server Name or IP Address [host]: 192.168.163.233
User Name [user]: admin
Path/Filename [
Section (all|chassis|FID# [all]):
*** CAUTION ***
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
switch, this file's configuration settings will override
any current switch settings. Downloading a configuration
file, which was uploaded from a different type of switch,
may cause the switch to fail. A switch reboot might be
required for some parameter changes to take effect.
configDownload operation may take several minutes
to complete for large files.
Do you want to continue [y/n]: y
Password: *******
Activating configDownload: Switch is disabled
configDownload complete: All config parameters are downloaded
To download the switch configuration data to the current logical switch from an external FTP server (no
chassis permissions):
switch:admin> configdownload -ftp 192.168.38.245, \
jdoe,config.txt,password
To download all system configuration data for the chassis and all logical switches (requires chassis
permissions):
switch:admin> configdownload -all -ftp 192.168.38.245, \
jdoe,config.txt,password