Dell POWEREDGE M1000E - Manual (Page 1000)

972 Fabric OS Command Reference
53-1002746-01
snmpTraps
2
--help
Displays the command usage.
EXAMPLES To send all traps to the configured recipients:
switch:admin> snmpTraps --send
Number of traps sent : 27
To send a bottleneck detection trap to recipient 172.16.0.12
switch:admin> snmptraps --send -trap_name \
bd-trap-ip_address 172.16.0.12.
Number of traps sent : 1
To display the traps and MIBs supported in Fabric OS:
switch:admin> snmpTraps --show
# |Mib Name |Supported Traps
---|----------------|--------------------------------
001|SW-MIB |sw-track-changes-trap
| |sw-fabric-watch-trap
| |sw-fc-port-scn
| |ip-v6-change-trap
| |sw-pmgr-event-trap
| |sw-event-trap
| |sw-fabric-reconfig-trap
| |sw-fabric-segment-trap
| |sw-state-trap
| |sw-port-move-trap
| |sw-brcd-genric-trap
002|FICON-MIB |link-rnid-device-registration
| |link-rnid-device-deregistration
| |link-lirr-listerner-added
| |link-lirr-listerner-removed
| |link-rlir-failure-incident
003|FA-MIB |conn-unit-status-change
| |conn-unit-sensor-status-change
| |conn-unit-port-status-change
| |conn-unit-event-trap
004|RFC1157 |cold-restart-trap
| |warm-restart-trap
| |if-link-up-trap
| |if-link-down-trap
| |snmp-authetication-trap
005|HA-MIB |fru-status-change-trap
| |fru-history-trap
| |cp-status-change-trap
006|BD-MIB |bd-trap
| |bd-clear-trap
To block a single port from receiving traps:
switch:admin> snmpTraps --block 17
To unblock a previously blocked port:
switch:admin> snmpTraps --unblock 17