Fanenable – Dell POWEREDGE M1000E User Manual

Page 310

Text mode
Original mode

282

Fabric OS Command Reference

53-1002746-01

fanEnable

Enables a fan unit.

SYNOPSIS

fanenable unit

DESCRIPTION

Use this command to set a previously disabled fan unit back to the default RPM speed.

NOTES

This command is not available on nonbladed systems except for the Brocade 5300.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operand:

unit

Specify the fan unit number to enable.

EXAMPLES

To enable a fan unit:

switch:admin> fanenable 1

Fan unit 1 has been enabled