Dell POWEREDGE M1000E User Manual
Page 903
Fabric OS Command Reference
875
53-1002746-01
portTrunkArea
2
To display trunk details for a user assigned TA 25 that includes ports 24-25:
switch:admin> porttrunkarea --show trunk
Trunk Index 25: 25->0 sp: 8.000G \
bw: 16.000G deskew 15 MASTER
Tx: Bandwidth 16.00Gbps, Throughput 1.63Gbps (11.84%)
Rx: Bandwidth 16.00Gbps, Throughput 1.62Gbps (11.76%)
Tx+Rx: Bandwidth 32.00Gbps, Throughput 3.24Gbps (11.80%)
24->1 sp: 8.000G bw: 8.000G deskew 15
Tx: Bandwidth 16.00Gbps, Throughput 1.63Gbps (11.84%)
Rx: Bandwidth 16.00Gbps, Throughput 1.62Gbps (11.76%)
Tx+Rx: Bandwidth 32.00Gbps, Throughput 3.24Gbps (11.80%)
To configure a TA on an enterprise-class platform including ports 13 and 14 on slot 10 with port index of
125:
1.
Disable the ports to be included in the TA.
2.
Enable TA for ports 13 and 14 on slot 10 with port index of 125:
switch:admin> porttrunkarea --enable 10/13-14 -index 125
Trunk index 125 enabled for ports 10/13 and 10/14.
3.
Show the TA port configuration (ports still disabled):
switch:admin> porttrunkarea --show enabled
Slot Port Type State Master TI DI
-------------------------------------------
10 13 -- -- -- 125 125
10 14 -- -- -- 125 126
-------------------------------------------
4.
Enable ports 13 and 14:
switch:admin> portenable 10/13
switch:admin> portenable 10/14
5.
Show the TA port configuration after enabling the ports:
switch:admin> porttrunkarea --show enabled
Slot Port Type State Master TI DI
-------------------------------------------
10 13 F-port Master 10/13 125 125
10 14 F-port Slave 10/13 125 126
SEE ALSO
,