Diagenablepost – Dell POWEREDGE M1000E User Manual

Page 263

Text mode
Original mode

Fabric OS Command Reference

235

53-1002746-01

diagEnablePost

Enables the power-on self-test (POST).

SYNOPSIS

diagenablepost

DESCRIPTION

Use this command to enable POST. A reboot is not required for this command to take effect. POST
includes two phases: POST Phase I mainly tests hardware and POST Phase II tests system functionality.

Use the diagPost command to display the current POST status, and use diagDisablePost to disable
POST.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

None

EXAMPLES

To enable POST:

switch:admin> diagenablepost
Config update Succeeded
Diagnostic POST is now enabled.