Rockwell Automation 5370-CVIM2 Module User Manual

Page 515

Chapter

Chapter 11

File Functions

11–7

Figure 11.4 Examples: Accessing “Viewing File” Panel

ЗЗЗЗ

Copy

The copy function enables you to copy a file to the same device under a
different name (a device cannot have two files with the same name). Also,
you can copy a file with either the same name or a different name to a
different device (except the

device), provided that device has sufficient

room for the copied file.

If no files are highlighted, the

button will be shaded. When you

highlight one or more files, the

button becomes active. When you then

pick the

button, the keyboard appears, asking you to “

Copy from

“xx:filename” to what file

.”

To copy a highlighted file to the same device, enter a different file name. To
copy multiple files, highlight the files, and use a new name for each file.

To copy a highlighted file to a different device, enter a device identifier, such
as “

MC:

” (use uppercase letters) ahead of the file name. You can use the

same file name, or a different one, in this case.

When you pick the

button on the keyboard, the copy operation

occurs, and the copied files enter the appropriate device under the selected
file names.

Figure 11.5 and Figure 11.6 (page 11–8) provide an example of the copy
operation.