Rockwell Automation 5370-CVIM2 Module User Manual

Page 349

Chapter

Chapter 7

Inspection Tools

7–111

Once you have selected a math tool as outlined in the Overview: Inspection
Tool Selection Process section (page 7–1), you can configure a formula for
that tool by picking the

Math

field in the toolset edit panel. (One math tool

must be selected and configured for each formula required in a particular
inspection application.)

When you pick the

Math

field, the math tool edit panel appears, as shown by

the example in Figure 7.90.

Figure 7.90

Example: Selecting the Math Tool Edit Panel

Math tool name

(default position)

ЙЙЙЙЙЙ

Note in Figure 7.90 that the math tool name appears on the screen in its
default name (“

Tool n

”) and position.

The math tool edit panel (named “

Toolset 1.Tool 4 Edit

” in Figure 7.90)

contains several data fields and buttons, which are described briefly as
follows:

•

Operation –– This field selects either the

Single

operation mode, during

which the math tool produces one result, or the

Multiple

operation mode,

during which the math tool can produce multiple results when certain
configuration requirements are met. (For details about the

Multiple