Altera Low Latency 40-Gbps Ethernet MAC and PHY MegaCore Function - Manual (Page 8)

Low Latency 40-100GbE IP Core Device Family and Speed Grade Support
The following sections list the device family and device speed grade support offered by the Low Latency
40-100GbE IP core:
Device Family Support on page 1-4
Low Latency 40-100GbE IP Core Device Speed Grade Support on page 1-5
Device Family Support
Table 1-1: Altera IP Core Device Support Levels
Device Support Level Definition
Preliminary The IP core is verified with preliminary timing
models for this device family. The IP core meets all
functional requirements, but might still be
undergoing timing analysis for the device family. It
can be used in production designs with caution.
Final The IP core is verified with final timing models for
this device family. The IP core meets all functional
and timing requirements for the device family and
can be used in production designs.
Table 1-2: Low Latency 40-100GbE IP Core Device Family Support
Shows the level of support offered by the Low Latency 40-100GbE IP core for each Altera device family.
Device Family Support
Stratix V (GX, GT, and GS) Final
Arria 10 (GX, GT, and GS) Refer to What's New in IP webpage
Other device families Not supported
Related Information
Low Latency 40-100GbE IP Core Device Speed Grade Support on page 1-5
What's New in IP
Information about the device support level in the current release of the Quartus II software.
1-4 Low Latency 40-100GbE IP Core Device Family and Speed Grade Support
UG-01172
2015.05.04
Altera Corporation About the Low Latency 40- and 100-Gbps Ethernet MAC and PHY MegaCore Function
Send Feedback