beautypg.com

Altera Low Latency 40-Gbps Ethernet MAC and PHY MegaCore Function User Manual

Page 182

background image

Differences Between Low Latency 40-100GbE

IP Core and 40-100GbE IP Core v15.0

C

2015.05.04

UG-01172

Subscribe

Send Feedback

The Low Latency 40-100GbE MegaCore function provides new functionality, and also sacrifices some

dynamic configuration options and features to achieve low latency and lower resource utilization than the

legacy 40-100GbE MegaCore function. In some cases, parameter options allow you to configure the Low

Latency IP core to include or exclude features that are dynamically configurable in the legacy IP core,

providing you the flexibility to achieve resource savings by removing features your design does not

require.
To compare the Low Latency 40-100GbE MegaCore function to previous releases of the 40-100GbE

MegaCore function, refer to the table and to the Altera documentation about the revision history of the

legacy 40-100GbE MegaCore function.

Table C-1: Major Differences Between the Low Latency 40-100GbE IP Core v15.0 and the 40-100GbE IP

Core v15.0

Lists the basic differences between the Altera 40- and 100-Gbps Ethernet MAC and PHY (40-100GbE) MegaCore

function, a product available through several previous Altera software releases, and the Low Latency 40- and 100-

Gbps Ethernet MAC and PHY (Low Latency 40-100GbE, or LL 40-100GbE) MegaCore function in its current

release.

Property

Low Latency 40-100GbE IP Core

40-100GbE IP Core v14.0

IP core installation

IP core for Arria 10 devices is

included in the Altera IP Library

(included in the ACDS) installation

for release 14.1
IP core for Stratix V devices is

available for installation and

integration into your ACDS installa‐

tion from the Self-Service Licensing

Center for release 14.1

IP core is included in the Altera

IP Library

Device support

Supports Stratix V and Arria 10

device families. Altera recommends

you target an Arria 10 device or use

the 40-100GbE IP core instead.

Supports Stratix IV, Arria V GZ,

and Stratix V device families.

Core options

MAC & PHY

PHY only, MAC only, or MAC

& PHY

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

This manual is related to the following products: