MTS Series 793 - Manual (Page 462)

Station Manager Shortcuts
Creating command line shortcuts greatly reduces the number of steps it takes to get your station open and
running. For Station Manager, you can use a shortcut to automatically specify the following station parameters:
• Project folder
• Configuration file name
• Parameter set
• Interlock chain
• Station views
• RSC (remote station control)—optional, not available on all systems
• User access level and password
• .hwi file name
• Test system name
• Controller name
• Import parameters file name
Shortcut command line
To create a Station Manager shortcut command line, first specify the application (stmgr), then the desired
station options.
The syntax of the shortcut command line is critical. If you do not use a supported command-line format, the
shortcut will not work.
To view a list of available Station Manager command-line options, enter stmgr /H from the command line.
These options are also described in the following table.
Note:
If the parameter name contains spaces (for example, test 257.000), the name must be enclosed in
quotation marks (“test 257.000“).
The Station Manager application supports two command-line formats: decorator-based and precedence
based.
Station Manager Command-Line Options
Example Default value Abbreviation
1
Option Description
/St practice.cfg None /St /Station Configuration file name
/Par “set 1” Parameter set last
used by configuration /Par /ParameterSet Parameter set name
1
Option names can be abbreviated to anything that is unique.
462 MTS Series 793 Control Software
Command Line Shortcuts