MTS Series 793 - Manual (Page 35)

Associated Application File Types in Folder Folder Name
MultiPurpose TestWare Profile
process.
You create Time History files with
MTS RPC software (optional). You
play out Time History files with the
MultiPurpose TestWare Time History
Output process (optional).
You create Scope Image files with
the Station Manager application’s
on-board software Scope. Scope Image (.emf) Scope Images
Shutdown Recorder data files (.log) contain
data captured subsequent to unexpected
shutdowns. Shutdown Recorder
Default File Locations in a Project
Default File Locations in a Project
Default Location in a Typical Series 793 Installation File Type
C:\MTS 793\Projects\individual Project (example:“Project 1”)\BTW Basic TestWare files (.tst)
C:\MTS 793\Projects\individual Project (example:“Project
1”)\Import-Export files Import-Export files (.txt)
C:\MTS 793\MPT\Procedure Templates MultiPurpose TestWare Procedure
Templates (default.000)
C:\MTS 793\Projects\individual Project (example:“Project
1”)\MPT\Procedures MultiPurpose TestWare Test Procedures
(.000)
C:\MTS 793\Projects\individual Project (example:“Project
1”)\MPT\Specimens\individual specimen (example: “spec01”) MultiPurpose TestWare Specimen files
(Specimen.dat, .log, .mpp, .mps, .prm)
C:\MTS 793\Projects\individual Project (example:“Project
1”)\Profiles Profile files (.blk)
C:\MTS 793\Projects\individual Project (example:“Project 1”) Project.793settings
C:\MTS 793\Projects\individual Project (example:“Project
1”)\Scope Images Scope Image files (.emf)
C:\MTS 793\Calibration Files Sensor calibration file (.scf)
C:\MTS 793\Controllers\individual Controller folder (example:
“FlexTest GT”)\Config Station configuration files (.cfg)
Not associated with project: Shutdown Recorder data (.log)
MTS Series 793 Control Software 35
Project Manager