MTS Series 793 - Manual (Page 115)

Example Station Controls - Your Control Panel May Appear Slightly Different
Item Callout
Provides access to features such as Manual Command.
1 - Toolbar
Lists the application that is currently running.
2 - Control Application
Use to control program execution. 3 - Program Controls
Click a Rig Command button to send the control channel(s) to
predefined command level(s). To display the Rig Command
4 - Rig Commands
buttons, select the Station Option window’s Display Rig
Command on Main Window check box.
Starts the program. Flashing green indicates that ramping is in
progress. Solid green indicates a running program. 5 - Program Run
Stops the program. Red indicates a stopped program. 6 - Program Stop
Holds the program. The application being run determines this
button’s availability. Yellow indicates a hold. 7 - Program Hold
Separate upper and lower limit indicators show the status of all
the user-defined limit detectors. For example, the Lower Limit 8 - Upper/Lower Limit Detectors
indicator turns red when any of the lower limits set in the Station
Setup window are tripped.
Separate upper and lower limit indicators show the status of all
the user-defined hardware limit detectors. For example, the 9 - Upper/Lower Hardware Limits
(optional)
MTS Series 793 Control Software 115
Station Manager Application