MTS Series 793 - Manual (Page 261)

Description Callout
The Impulse Response value (dX) in this example is 0.209.
Enter this value for the Impulse Response control on the
AIC page as 0.21. 1
Points to mark on the feedback to determine Impulse
Response (dX). 2
b) Enter this value on the Impulse Response slider.
c) To save the tuning values, go to the Station Manager window’s File menu and select Save Parameters.
5. Set up and turn on limits to protect yourself and your equipment.
6. Install a dummy specimen.
7. Set up a random noise program.
a)
In the Station Manager window, click .
MTS Series 793 Control Software 261
Station Setup