MTS Series 793 - Manual (Page 441)

Description Item
Specifies the lower (valley) reference value (reference type must be
user-specified). Lower Reference
Peak Det. Summary Tab
Use the Peak Det. Summary tab to determine the current status of each sensor signal.
Peak Det. Summary Tab
Description Item
Specifies the sensor feedback signal monitored by a limit detector. Signal
Indicates when a signal peak is above its “peak reference” tolerance band or a
signal valley is below its “valley reference” tolerance band Over
Indicates when a signal peak is below its “peak reference” tolerance band or a
signal valley is above its “valley reference” tolerance band. Under
Test Log Tab
Use the Test Log tab to select the level and source of the messages that are logged to the Basic TestWare
test log. Automatic deletion of archived log files of a specified age can also be selected here.
Test Log Tab
Description Item
Message Capture
Allows you to select the level of messages logged. Minimum Severity
Allows you to select the source of your logged messages. Source
Select This Application Only to log only Basic TestWare messages.
Select All Applications to log messages from both Basic TestWare and Station
Manager.
Allows you to automatically delete old archived log files. Archive Auto Deletion
Click the Delete Older Than check box and select the age (days) of the archive
log file required for automatic deletion.
MTS Series 793 Control Software 441
Basic TestWare Application