MTS Series 793 - Manual (Page 163)

Custom Action Settings
Message
Defines messages written to the Message Logs window.
Description Custom Action
Type the message text that will be written to the Message Logs window. Message
Select a severity level associated with the message.
Ramp To
Defines a controlled ramp to a specific level. The program stops at the end of the ramp. You can have a total
of seven Ramp To and Stop At Level actions.
Note:
Your system must be in Program Run to implement this feature.
Description Item
Sets the ramp time. Ramp Time
Identifies the channels where the ramp occurs. Channel
Sets each ramp’s control mode. Control Mode
Sets each ramp’s ending level. Level
Stop At Level
Defines program stop actions. You can have a total of seven Stop At Level and Ramp To actions.
Note:
Your system must be in Program Run to implement this feature.
Description Item
Identifies the channels where the stop occurs. Channel
Sets each stop’s control mode. Control Mode
Hydraulics/Powers
Defines station hydraulic and power actions.
Description Item
Identifies the power source affected by the action. Power
Defines what each action does. For hydraulic service manifolds (HSMs),
the choices are Disabled and Power Off. Options
MTS Series 793 Control Software 163
Station Manager Application