MTS Series 793 - Manual (Page 294)

Item Callout
Error 1
Feedback 2
Test Command 3
The Error Detectors tab has two limits:
• Inner Limit—Typically set to indicate the beginning of failure.
• Outer Limit—Typically set to stop the test.
How to Monitor Error Detectors
Method 1
1. On the Station Manager window’s Display menu, select Station Setup.
2. In the Station Setup window navigation pane, click Detectors and then Errors.
3. On the Errors Detectors panel, click Error Summary tab.
Method 2
1.
On the Station Manager window’s Station Controls panel toolbar, click
2. In the Detectors window, click the Error Detectors tab.
294 MTS Series 793 Control Software
Station Setup