About remote setpoint adjust – MTS Series 793 User Manual
Page 304
Description
Item
Manual Command
Use the Manual Command window to manually position the actuator
during specimen installation.
Span Setpoint
Use the Setpoint and Span window to adjust channels’ setpoints and
span.
Remote Setpoint Adjust
Use the Remote Setpoint Adjust (RSA) window to make channel and
control mode assignments to RSA knobs.
Note:
The RSA option must be selected at installation and the knobs
must be added using the Station Builder application.
Note:
Changes made to the Manual Command and Setpoint and Span settings (for example, slider-bar range
settings) can be saved with the parameter set.
About Remote Setpoint Adjust
The Remote Setpoint Adjust window assigns channels and control modes to the Remote Setpoint Adjust
(RSA) box’s control knobs. RSA allows you to remotely adjust actuators’ setpoints, away from the computer
screen.
Note:
The RSA option must be selected at installation and the knobs must be added in Station Builder.
Access
Station Controls panel toolbar >
304 MTS Series 793 Control Software
Using Station Manager to Run Tests
- Series 111 Accumulator (40 pages)
- Series 249G2 Swivels (34 pages)
- Series 201 Actuators (40 pages)
- Series 215 Rotary Actuator (68 pages)
- Series 242 Actuators (40 pages)
- Series 244 Actuators (68 pages)
- Series 247 Actuators (40 pages)
- Series 248 Actuators (46 pages)
- 709 Alignment System (158 pages)
- Series 609 Alignment Fixture (70 pages)
- 494 Controller Hardware FT 40 (344 pages)
- ReNew Technical Reference (50 pages)
- DCPD Measurement System (46 pages)
- Bionix EnviroBath (40 pages)
- FGW900 High-temperature Furnace (38 pages)
- Model 409.83 Temperature Controller (40 pages)
- Series 651 Environmental Chambers (30 pages)
- Series 653 High-Temperature Furnaces (38 pages)
- Series 658 Environmental Chamber (24 pages)
- Series FEC Environmental Chamber (48 pages)
- Model 685.53 Grip Control Module (24 pages)
- Series 685 Hydraulic Grip Supply (48 pages)
- Bend Fixture-10 kN (2 pages)
- Grip-Manual Bend Fixture-100 kN (2 pages)
- Grip-Manual Bollard-2 kN (2 pages)
- Grip-Manual Bollard-500 N (2 pages)
- Compression Platen-100 kN-100mm (2 pages)
- Compression Platen-100 kN-150mm (2 pages)
- Compression Platen-100 kN-200mm (2 pages)
- Compression Platen-20 kN (2 pages)
- Compression Platen-20 kN-100mm (2 pages)
- Compression Platen-20 kN-200mm (2 pages)
- Compression Platen-20 kN-SST (2 pages)
- Compression Platen-500 N FYC502A (2 pages)
- Compression Platen-500 N FYB502A (2 pages)
- Compression Platen-500 N-50mm (2 pages)
- Grip-Pneumatic Vise-Style-1 kN (2 pages)
- Pneumatic Bollard-500 N (2 pages)
- Scissor-Style-2 kN (2 pages)
- Scissor-Style-5 kN (2 pages)
- Screw-Style-5 kN (2 pages)
- Screw-Style-5 kN-SST (2 pages)
- Bend Fixture-1000 kN (2 pages)
- Bend Fixture-300 kN (2 pages)
- Bolt Grips (32 pages)