MTS Series 793 - Manual (Page 388)

Scope Setup and Operation
About the Scope
The Station Manager application’s Scope window is an oscilloscope. You can use it to plot signals against
time, frequency, and against each other.
You can create up to four scopes per station, and add up to four signal pairs per scope.
Description Callout
Trace toolbar 1
Y1 Axis 2
Plot 3
X Axis 4
Y2 Axis 5
Default settings
By default, the time plot mode is selected, one signal pair consisting of Command and Active Feedback
signals is displayed, and the Continuous sweep mode is selected.
388 MTS Series 793 Control Software
Scopes and Meters