Lenze DSD - Manual (Page 65)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
65
7 Applications
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Applications
Currently the DSD contains 21 application models by means of which most of the application cases
for the Lenze drives can be calculated.
In the following chapters each application is described in detail. Apart from a description of the ap-
plication, all displayed parameters, selection tables, and options are explained.
Application data
DSD is able to calculate an application "With detailed values" or "With standard values". Standard
values serve to carry out quick and approximate dimensioning processes for which not all parame-
ters of the application are known or are to be taken into consideration.
• When it is calculated "With standard values", the input area for detailed values is deactivated.
The values in the text fields with a grey background, however, will be considered in the calcula-
tion. Input area ( 33)
Alternative dimensioning
The Data of the application dimensioning step serves to quickly create e.g. an alternative "With de-
tailed values" dimensioning" from a "With standard values" dimensioning".
• The "Alternative" function serves to create a copy of the current project in each dimensioning
step. Creating an alternative ( 57)

Note!
During the dimensioning phase, the DSD can display warnings and notes!
• The " Drive dimensioning messages " chapter contains all warnings and notes with
their possible causes and remedies as well as tips for optimising the dimensioning.
( 441)