Lenze DSD - Manual (Page 207)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
207
7 Applications
7.22 Winding drive for rewinder/unwinder
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.22.2.2 Symbols used
Symbol Description Dimension unit
a Translatory acceleration m/s 2
b
max
Max. width of the winding material mm
d Diameter characteristic mm
d
dim
Dimensioning diameter
• Diameter which is reached after termination of the acceleration phase.
mm
d
min
Minimum reel diameter (initial diameter) mm
d
max
Maximum reel diameter mm
F
min
Tensile force with min. reel diameter N
F
max
Tensile force with max. reel diameter (initial diameter) N
k
f
Field weakening factor
k
f
Tensile force setting range
k
M
Torque setting range
k
n
Speed setting range
k
v
Speed setting range
l Length of the winding material m
M
sds
Stationary torque Nm
m
sum
Total torque Nm
n
max
Max. motor speed rpm
n
rated
Rated speed of the motor rpm
ρ Average density of winding material kg/dm 2
P
App
Required process power
P
M
Required motor output kW
q Winding ratio
q
max
Maximum winding ratio
q
dim
Dimensioning winding ratio
s
min
Thickness of the winding material
• If multiple materials are wound at the same time, the smallest material
thickness must be indicated.
mm
t
acc
Acceleration time of the winding drive m/s
t
dec
Deceleration time of the winding drive m/s
v
max
Max. speed of the material m/min
α Angular acceleration rad/s 2
η Mechanical efficiency of the winding system (coil and coil intake)
ω Angular velocity rad/s