Lenze DSD - Manual (Page 483)

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
483
18 Drive dimensioning messages
18.13 User motor
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.13 User motor
18.13.1 Limited check of the user motor
18.13.2 No options available for the user motor
Note!
DSD is only able to check the user motor to a limited extent. The drive dimensioning is based on the gen-
eral rules for checking Lenze components.
Check the motor according to the guidelines of the manufacturer.
Cause Effects Possible remedies
Construction data of user motors are
not known. DSD is not able to carry
out manufacturer-specific checks.
Limit values may be exceeded. The
motor may be thermally overloaded.
• Check the motor according to the
guidelines of the manufacturer.
• Have the motor checked by the
manufacturer.
Note!
No product options are available for the user motor.
Contact the motor manufacturer.
Cause Effects Possible remedies
Product options for user motors are
not available in DSD.
Selection of product options is not
possible.
Contact the manufacturer of the mo-
tor.