Lenze DSD - Manual (Page 56)

6 Drive dimensioning tools
6.2 Optimising drive solutions
56
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.2 Optimising drive solutions
DSD provides different functions for optimising drive dimensionings and finding a demand-orient-
ed drive solution.
[6-1] Functions for optimising drive dimensionings
Creating alternatives and project comparison
Recommended use
• The drive should be dimensioned with alternative components. The process and motion data re-
main unchanged.
• An alternative to the current drive dimensioning can be created at any position in the navi-
gation tree.
• You can compare the alternatives to the most important key data. The project comparison
can be printed.
Examples
• A drive dimensioning may require several alternatives to make a decision based on technical or
commercial considerations.
• We recommend several drive dimensioning with different components.
• The drive solution should be calculated with different reserves.
Application Tuner
Recommended use
• The drive should be dimensioned with different process and motion data. The components re-
main unchanged.