7applications – Lenze DSD User Manual
Page 194
7
Applications
7.21
Dimension the multi-axis system
194
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[7-193] Motion profiles: Relationship of starting time t
0
, number of repetitions N
T
and cycle time t
Crd
Parameter
Unit
Description
Metric
Imperial
U
V
V
Mains voltage of the AC supply system. The DC-bus volt-
age is expected to be generated by rectifying the mains
voltage.
• Read only.
• You can only add DSD projects that have been dimen-
sioned with the same mains voltage.
Drive axis (*.dsd)
Names of the inserted DSD projects.
• Read only.
• An added DSD project makes at least one drive axis.
N
D
Number of drive axes that are assigned to the DSD
project.
t
0
s
s
Postpone the starting time of the motion profile.
N
T
Number of how often the motion profile is repeated.
t
s
s
Time in which the motion profile is running.
• Read only.
P
mot,max
kW
kW
Max. required power to be provided by the supply com-
ponent.
• Read only.
P
gen,max
kW
kW
Max. regenerative power which may occur in the DC bus.
• If multiple regenerative power supply modules are
connected in parallel, the occurring peak braking
power is distributed to the individual modules.
• Read only.
P
rated
kW
kW
Rated power of the inverter.
• Corresponds to the typical motor power of a standard
asynchronous four-pole motor.
P(inverter
kW
kW
Total
Sum of the values per column.
Read only.
Weighted total
Average consisting of the sum of the values and the
number of axes.
• Read only.
t
Crd
t
0
N
T
= 1
N
T
= 2
t
t