Lenze DSD - Manual (Page 360)

11 Drive Dimensioning
11.7 Motor components
360
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.7.2 Selection table
The selection table presents the parameters of the feedback systems which can be selected.
• A distinction between preview values and further parameters is to be made.
• A basic description of the selection table and tools for a quick selection of suitable components
can be found here:
 Structure of the selection tables ( 34)
 Sorting and filtering results in selection tables ( 35)
Description of the parameters
Description
 Drive dimensioning messages.
• The feedback system does not match the inverter.
Information
• Important information has to be observed for a correct function of the component. A blue back-
ground indicates the corresponding value.
Parameter Description
Feedback Type of feedback system
 Feedback selection ( 357)
Connectable on the inverter Combinability of the feedback system with the inverter and motor
 Inverter/feedback combination not possible ( 463)