2 "line" tab: motion profile, Line" tab: motion profile ( 250), 8motion design – Lenze DSD User Manual
Page 250
8
Motion design
8.2
MotionDesigner
250
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2.7.2
"Line" tab: Motion profile
In this tab, you create or edit the line elements of a motion profile. Select an already created element
to edit it. Values are always entered positively.
Legend
Description
Base values
• Entry of the speed.
• Grayed out input fields are deactivated. The values are calculated automatically.
Specification
Specification – basic values ( 257)
Distance
Distance / angle – basic values ( 258)
Angle
Time
Velocity
Velocity / final speed – basic values ( 259)
Final speed
Starting velocity
Starting velocity / starting speed – basic values ( 259)
Starting speed
Acceleration
Acceleration – basic values ( 259)
Buttons
Set as default Accept values in the Basic values area as specification.
Apply changes Change the highlighted element in the Graphic area according to the entered values.
The button is only active if an element is selected in the Graphic area.
Attach element Attach an element with the specified values to the motion profile in the right Graphic area.
• The button is only active if no element is selected in the Graphic area.