Lenze DSD - Manual (Page 46)

4 Setting up the DSD workplace
4.4 Language
46
Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.4 Language
With the command ExtrasSelect language you select the language of the user interface.
• The languages German, English (British), Czech, Danish, English (American), Spanish, French,
Italian, Dutch, Russian, Swedish, Chinese (simplified) and Chinese (traditional) are provided.
• The change-over is effected immediately. The DSD does not have to be restarted.

Tip!
By means of the language switch you can create a project in your native language and then
print the Protocol in another language.
4.5 Settings
By using the command ExtrasSettings, you open the Settings dialog box.
• The Settings dialog box contains different tabs via which you can carry out the basic settings.
• Detailed information on the different tabs can be found in the following subchapters.
• With the buttons in the dialog box below you confirm or reject changes carried out:
Button Function
OK Confirm entries and close dialog box.
Cancel Reject entries and close dialog box.
Accept Confirm entries and keep dialog box open for further entries.