Rainbow Electronics GM862-QUAD-PY - Manual (Page 50)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 50 of 434
+ICF - DTE-Modem Character Framing SELINT 0 / 1 / 2
Example Auto detect
AT+ICF = 0
OK
8N2
AT+ICF = 1
OK
8O1
AT+ICF = 2,0
OK
8E1
AT+ICF = 2,1
OK
8N1
AT+ICF = 3
OK
7O1
AT+ICF = 5,0
OK
7E1
AT+ICF = 5,1
OK
3.5.3.3 Call Control
3.5.3.3.1 Dial - D
D – Dial SELINT 0 / 1
ATD[;] Execution command starts a call to the phone number given as parameter.
If “;” is present, a VOICE call to the given number is performed, regardless
of the current value of the connection mode set by +FCLASS command.
Parameter:
- phone number to be dialed
Note: type of call (data, fax or voice) depends on last +FCLASS setting.
Note: the numbers accepted are 0-9 and *,#,”A”, ”B”, ”C”, ”D”,”+”.
Note: for backwards compatibility with landline modems modifiers “T”, ”P”,