Rainbow Electronics GM862-QUAD-PY - Manual (Page 126)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 126 of 434
+CPBR - Read Phonebook Entries SELINT 0 / 1
phonebook memory
- integer type value in the range of location numbers of
phonebook memory
The response format is:
+CPBR: ,,,
where:
- the current position number of the PB index (to see the range of
values use +CPBR=?)
- string type phone number in format
- type of phone number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
- the alphanumeric text associated to the number; used character set
should be the one selected with command +CSCS.
Note: if “MC” is the current selected phonebook memory storage, all the
missed calls coming from the same number will be saved as one missed
call and +CPBR will show just one line of information.
Note: If all queried locations are empty (but available), no information text
lines will be returned, while if listing fails in an ME error, +CME ERROR:
is returned.
AT+CPBR=? Test command returns the supported range of values of the parameters in
the form:
+CPBR: ( - ),,
where:
- the minimum number, integer type
- the maximum number, integer type
- maximum field length, integer type
- maximum field length, integer type
Note Remember to select the PB storage with +CPBS command before issuing
PB commands.
Reference GSM 07.07
+CPBR - Read Phonebook Entries
SELINT 2
AT+CPBR=
[,] Execution command returns phonebook entries in location number range
.. from the current phonebook memory storage selected
with +CPBS. If is omitted, only location is returned.
Parameters:
- integer type, value in the range of location numbers of the
currently selected phonebook memory storage (see +CPBS).
- integer type, value in the range of location numbers of the