Rainbow Electronics GM862-QUAD-PY User Manual
Page 14
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 14 of 434
Numeric Format
Verbose Format
612
resource used by other instance
Network survey errors:
(only if command #SELINT=2 has been issued - see §3.5.2.1.1):
657
Network survey error (No Carrier)*
658
Network survey error (Busy)*
659
Network survey error (Wrong request)*
660
Network survey error (Aborted)*
SAP related errors:
(only if command #SELINT=2 has been issued - see §3.5.2.1.1):
731
Unspecified
732
Activation command is busy
733
Activation started with CMUX off
734
Activation started on invalid CMUX
736
Remote SIM already active
737
Invalid parameter
*(values in parentheses are GSM 04.08 cause codes)
3.2.2.2 Message Service Failure Result Code - +CMS ERROR:
This is NOT a command, it is the error response to +Cxxx GSM 07.05 commands
Syntax: +CMS ERROR:
Parameter:
Numeric Format
Meaning
0...127
GSM 04.11 Annex E-2 values
128...255
GSM 03.40 sub clause 9.2.3.22 values
300
ME failure
301
SMS service of ME reserved
302
operation not allowed
303
operation not supported
304
invalid PDU mode parameter
305
invalid text mode parameter
310
SIM not inserted
311
SIM PIN required
312
PH-SIM PIN required
313
SIM failure
314
SIM busy
315
SIM wrong
316
SIM PUK required
317
SIM PIN2 required
318
SIM PUK2 required
320
memory failure
321
invalid memory index
322
memory full
330
SMSC address unknown
331
no network service
332
network time-out
500
unknown error